I need spindle measurements of front hub, I seem to have various ones so need to sort which is correct. Many thanks, Les.
Announcement
Collapse
No announcement yet.
Spindle for tin/paddle hub.
Collapse
X
-
Greeves Wheel Spindle Factory Drawings.....
I posted some Greeves wheel spindle factory drawings here that may be of help Les.....http://greeves-riders.org.uk/forums/...indle+drawings
I also posted a bunch of Greeves hub drawings which also include illustrations of various spindles that may further assist the identification process....http://greeves-riders.org.uk/forums/...light=drawings
Just click on the links above and they'll take you straight to the relevent threads.
Brian.
-
Front Wheel Spindle...Tin Hub
Hi Les, the spindle you want is, overall length 8.5 inches with a raised centre spacing of 2 5/8 inch width, with 3.5 inch to spacing on one side and 2 5/8 from the other side of spacing to end of spindle.The threaded portion is 1 3/4 on both sides. the thread is 9/16 x20tpi. The bosses should be interference fit for a 6202 bearing.These are all approx measurements but should be ok to identify from your collection of spindles.I can photograph one if you cannot identify from my description...let me know....John P
Comment
-
Info no good Les....?
Originally posted by mayfield View Post....please say hello when you visit lots of friends are made this way....
This one too....http://greeves-riders.org.uk/forums/...ead.php?t=6207
Sorry Les, but I just felt I needed to say something following your post. The forum benefits from people's support too, and some us try hard to do that.
Brian.
Comment
-
Hi Craig,
I aready had a look for you when you first mentioned the front wheel spindle issue ages ago, but no joy I'm sad to say...... I have very little on the later bikes, Giffons/QUB especially.....
Have you tried asking Rob? I know he's got lots on his plate and is working his **** off on behalf of the club at the moment, but I'm sure he'd have a look for you...
Unless, of course, anyone on here can help....?
Good hunting bud.
Brian.Last edited by Brian Thompson; 29/01/2017, 11:45 AM.
Comment
-
Spindle for tin/paddle hubs
Hi.Brian, I am not clear as to your comments regarding my post ref.the Bristol Show, if it's because I have not acknowledged the helpful responses given to my query I can only apologise, this will be done when a conclusion is reached. Regards Les.
Comment
-
Spindle for tin/paddle hub.
Further to my query regarding measurements, with John's help{thanks John} I can now identify that I can adapt a rear spindle,which I have to hand,as I have to farm out this adaption I will remove a front spindle from another of my bikes to provide a pattern.Thanks. Les.
Comment
Comment