If this is your first visit, be sure to
check out the FAQ by clicking the
link above. You may have to register
before you can post: click the register link above to proceed. To start viewing messages,
select the forum that you want to visit from the selection below.
Hi all….finished fitting the leading link forks and they touch the front of the tank on full lock is there a lock stop to prevent this.any help appreciated
Cheers Dug
If the forks are anything like those on the Silverstone there will be a couple of threaded holes just above the bottom yoke. These take 1/4 whitworth screws and locknuts which act as the lock stops, striking the frame casting just behind the lower headstock bearing. Of course, there are a lot of differences between the Challenger and the road racers, but it will be easy for you to check to see if that aspect is similar.
Comment