I'm new here, from Missouri in the Colonies. I just discovered this Forum. I have a Greeves MX 6 B Rolling Chassis and a spare Triumph Unit 500 I'd like to insert in it. I need guidance in finding templates or mounts for this engine / chassis combo. If anyone can help I'd appreciate it. Thanks.
Announcement
Collapse
No announcement yet.
FNG - Friendly New Guy
Collapse
X
-
Phil, bear in mind that the 24MX6 was a US-only MX5 with an MX4 short-stroke motor. I don't know how that would affect the engine plates for a Triumph, but I just thought I'd mention it.
Hi Cyclejack, good to see you on here and good luck with your special - should be a fun bike!Colin Sparrow
Comment
-
Or as Andrew King once aptly put it: "The blacksmithing approach to motorcycle manufacture"Last edited by Colin Sparrow; 13/02/2018, 11:01 AM.Colin Sparrow
Comment
-
Originally posted by Colin Sparrow View PostPhil, bear in mind that the 24MX6 was a US-only MX5 with an MX4 short-stroke motor. I don't know how that would affect the engine plates for a Triumph, but I just thought I'd mention it.
Hi Cyclejack, good to see you on here and good luck with your special - should be a fun bike!
Comment
-
Originally posted by Phil HydeWaiting to see if CycleJack is up for the challenge!
Accommodating the front down beam is standard stuff. Cutting the gearbox mounts out and fabricating suitable parts to take the Triumph gearbox requires a bit of knife and fork engineering
Comment
Comment