If this is your first visit, be sure to
check out the FAQ by clicking the
link above. You may have to register
before you can post: click the register link above to proceed. To start viewing messages,
select the forum that you want to visit from the selection below.
try doing it yourself, its not too difficult, just do not tighten the spokes till the wheel runs true.- use the forks or s/arm as a jig. If you were a bit nearer I would offer to show you how.
I have twice had wheels done by the guy on Manchester St in Derby. But was quite a while ago, did a good job, Not sure if I could find his contact details now.
Comment