If this is your first visit, be sure to
check out the FAQ by clicking the
link above. You may have to register
before you can post: click the register link above to proceed. To start viewing messages,
select the forum that you want to visit from the selection below.
Can anyone tell me if the forks off Scottish with the roller ball alloy beam fit the alloy beam with the taper type bearings ? and vice versa .
Simon
You would have to remove the bearing holder from the frame (they are brazed in) and turn them to the necessary size and rebraze them in. I have altered timkin to ball. You can also buy (expensive) an adapter to fit timkin to ball race forks.It slightly increases the gap between the yokes.
Comment