That looks great Tony. Is it your Exeter trial bike?
Announcement
Collapse
No announcement yet.
TFS Trail (2)
Collapse
X
-
The 'Neerg' Greeves!
Hi Tony,
Inspired choice of colour mate, works really well in my opinion. Ties in nicely with the 'Hunting Green' MX4's and is very 'Greeves'.
Looking good Tony, and hope it gives you a great ride in Devon.
Now then....do 'ammerite doo a nice shade of 'wolleY' for the next one....
Keep up the good work Tony, and thanks for sharing the latest, as always.
Brian.
Comment
-
I had a car that looked good, at night...well away from street lights....! Bike looks good, what bulb are you using in the front? Paul Goff does a range of upgrade / halogen bulbs for most applications. see www.norbsa02.freeuk.com
Comment
-
Once I have it wired on 12 volts, LED front and back. I have an 8 amp battery which will be trickled fed from a boosted 6 volt to 12 volts : - hopefully. If not I will think about putting on electronic ignition with the lighting coils.
I have used Paul Goff however I find he is not the most competitive price wise
Comment
-
Does anyone know the paint code for Moorland Creosote.....?
Originally posted by tony View Post- and don't you think Woolley is a tad brash for my taste?
Go on go on go on go on go on go on.....yer will yer will yer will......(Father Ted reference...)
Besides, I reckon Wolley is a great colour for Greeves.....but then, you know me when it comes to bananas.....
Here's one just begging for one of your amazing transformations mate......(and somebody's already made a start on the tank....bit more work with the trowel and it'll be mint!!)
Brian.
PS For the more serious minded, discussing Bananas on this forum cannot be construed as drivel because Mr Greeves used 'em on his bikes.....I seen a picture....so yar boo shucks! Besides, it's just a bit of fun.....isn't it?
Comment
-
That yellow one is now egnaro, the blue on is now green and the silver, well that is still silver - keep up 😀😀😀.
Trouble is that I only have one Ranger left and that is going to be as original,
Well probably,
While we are talking fruit, at least I still have a pear ( ) of Rangers on the way to completion.
Comment
-
Wiring
Just started wiring the bike for night time use. LED front and rear, the rear Wipac light I am changing so the bulb is horizontal which is needed for the LED.
The wires are in place and everything works as it should, though I have not wired in the Miller switch yet .
Since the lights etc are running off the battery this should not be too complicated (it is for me )
I need to know whether the switch I have is suitable and which wire goes where.
I have the red wire + earth ---all lights have a dedicated earth
The wire for the headlight and tail light
The main beam
The parking bulb
Effectively four wires, here is the switch
So which wire goes where?
Comment
-
Tony
Try wiring it to Wiring Diagram - 1959 20TA + 24TA, 1958 20TA + 25TA, 1956-7 20T. posted by Brian T in this thread http://www.greeves-riders.org.uk/for...ghting+diagram
Comment
-
Flux Capacitance.
Originally posted by John Wakefield View PostTony
Try wiring it to Wiring Diagram - 1959 20TA + 24TA, 1958 20TA + 25TA, 1956-7 20T. posted by Brian T in this thread http://www.greeves-riders.org.uk/for...ghting+diagram
The diagram is in post #2, hope it helps.
...and while you've got the blow lamp out....any chance you could re-wire my old Fender Strat while you're at it....
Twanger.
Comment
-
More chance of repairing your Fender Strat than sorting the wires
I had a look at the drawings and had a glass of wine. Did not make any more sense, so I had another glass of wine - nothing makes sense now
My switch has only got 4 connecting points as it stands at the moment
One must be for the parking bulb, one for headlamp and tail combined (separate switch for main beam) and a connection for earth
Joining by numbers would be good
(you could then use the numbers for the lottery)
1
5
6
7
8
Comment
Comment