If this is your first visit, be sure to
check out the FAQ by clicking the
link above. You may have to register
before you can post: click the register link above to proceed. To start viewing messages,
select the forum that you want to visit from the selection below.
I had a car that looked good, at night...well away from street lights....! Bike looks good, what bulb are you using in the front? Paul Goff does a range of upgrade / halogen bulbs for most applications. see www.norbsa02.freeuk.com
Once I have it wired on 12 volts, LED front and back. I have an 8 amp battery which will be trickled fed from a boosted 6 volt to 12 volts : - hopefully. If not I will think about putting on electronic ignition with the lighting coils.
I have used Paul Goff however I find he is not the most competitive price wise
Thanks Brian, probably they won't win an Award in Greeves monthly or Fabricators fortnightly
As long as they hold the lamp so I can see where I am, particularly in the lanes back from work.
- and don't you think Woolley is a tad brash for my taste?
- and don't you think Woolley is a tad brash for my taste?
......errr.....no!!
Go on go on go on go on go on go on.....yer will yer will yer will......(Father Ted reference...)
Besides, I reckon Wolley is a great colour for Greeves.....but then, you know me when it comes to bananas.....
Here's one just begging for one of your amazing transformations mate......(and somebody's already made a start on the tank....bit more work with the trowel and it'll be mint!!)
Brian.
PS For the more serious minded, discussing Bananas on this forum cannot be construed as drivel because Mr Greeves used 'em on his bikes.....I seen a picture....so yar boo shucks! Besides, it's just a bit of fun.....isn't it?
Attached Files
Last edited by Brian Thompson; 22/10/2016, 09:07 PM.
Reason: Pics added.
That yellow one is now egnaro, the blue on is now green and the silver, well that is still silver - keep up 😀😀😀.
Trouble is that I only have one Ranger left and that is going to be as original,
Well probably,
While we are talking fruit, at least I still have a pear ( ) of Rangers on the way to completion.
Just started wiring the bike for night time use. LED front and rear, the rear Wipac light I am changing so the bulb is horizontal which is needed for the LED.
The wires are in place and everything works as it should, though I have not wired in the Miller switch yet .
Since the lights etc are running off the battery this should not be too complicated (it is for me )
I need to know whether the switch I have is suitable and which wire goes where.
I have the red wire + earth ---all lights have a dedicated earth
The wire for the headlight and tail light
The main beam
The parking bulb
More chance of repairing your Fender Strat than sorting the wires
I had a look at the drawings and had a glass of wine. Did not make any more sense, so I had another glass of wine - nothing makes sense now
My switch has only got 4 connecting points as it stands at the moment
One must be for the parking bulb, one for headlamp and tail combined (separate switch for main beam) and a connection for earth
Comment