Hawkstone 24SCS Gearbox ratios

[Mark T]

Hi,
I have a 1960 Hawkstone 24SCS but some of the gearbox internals were missing when I acquired it! What I have is;

Mainshaft 25T (High gear pinion) - Layshaft 17T
Mainshaft 24T (D9227) - Layshaft 18T (E9229)
Mainshft Missing - Layshaft Missing
(would this be E9229 18T Mainshaft - Layshaft 24T D9228)
Mainshaft 14T - Layshaft 28T (Ratchet wheel)

Does this look about right for the ratios for the scrambler? if so where can I purchase the missing gears if they are still available? if not what would you recommend for suitable ratio/gears?
Hopes this makes sense!

Regards Mark

[John Wakefield]

Try Villiers Services https://villiersservices.co.uk/contact-us/ they should be able to supply you the correct gears.

[Mark T]

Will do Thanks John

[garybam4711]

Hi mark
I would have some good second hand gears and shafts
but on holiday till after the 4th October
Gary

[Mark T]

Thanks Gary that would be brilliant.
regards Mark

[Mark T]

Hi all, I have been told that this is a bit of mismatch of gearing which really isn’t a surprise as I couldn’t match the arrangement up with any parts book!
Regards Mark

[Mark T]

Hi all,

Just to confirm that the actual correct gears and part numbers for my 1960 Hawkstone 24SCS ;

C12218 Mainshaft 15T
D12222 Sliding gear without dogs 19T
D12224 Sliding gear with dogs 22T
C12220 Pinion High Gear 25T


D12221 Ratchet pinion Kickstart 26T
D12223 Sliding gear with dogs 23T
D12222 Sliding gear without dogs 19T
C12219 Layshaft 17T

Regards
Mark