Not sure if there is an official Greeves drawing for these but I have made the following drawing of the exhaust pipe for the 4T engined roadsters, the 25DCmk2; East Coaster; and 25DDmk2 Essex.
I took measurements from my own bike, but cant be responsible for any made to the drawing that dont fit properly. I would suggest that any made to the drawing are trial fitted before final finishing or chroming. They could also be made in stainless steel of course. Once coordinates are put into a CNC pipe bending machine it should be easy to make a batch should anyone be inclined to do so. Both LH & RH pipes are to my knowledge the same basic shape but may need a slight bend L or R to line up with exhaust port.
I took measurements from my own bike, but cant be responsible for any made to the drawing that dont fit properly. I would suggest that any made to the drawing are trial fitted before final finishing or chroming. They could also be made in stainless steel of course. Once coordinates are put into a CNC pipe bending machine it should be easy to make a batch should anyone be inclined to do so. Both LH & RH pipes are to my knowledge the same basic shape but may need a slight bend L or R to line up with exhaust port.
Comment