Announcement

Collapse
No announcement yet.

25DB rear sub frame

Collapse
X
Collapse
 
  • Page of 1
  • Filter
  • Time
  • Show
Clear All
new posts
Previous template Next
  • #1

    25DB rear sub frame

    Can anyone help me. I may not have the correct rear sub frame on my 25DB.
    As drawing for this item is not available can anyone give me the hole centres
    say from swinging arm pivot to top of rear shocks pivot and also top of rear shock pivot to front dual seat FRAME mounting. I have had a d/seat frame
    made to dwg M11/S and is about 1/2" to short from rear mounting to front mounting. D/seat frame made is dimensionally correct to dwg.
    Thanks in anticipation. rickport.
    Tags: None
  • #2
    25db seat frame

    the dimentions you asked for are
    1 16 1/8th
    2 8 1/2
    having fun?

    Comment

    • #3
      25db

      Hi Mike thanks for speedy reply, (vilserv have not responded after 2 wks).
      Measurements you give are correct ( same as mine ) if taken at right angles to centres. Unfortunately dwg M11/S shows top of shocks to front fixing to be
      8 15/32" on diagonal and that's how new dual seat frame has been made.
      ( No not having fun ) It would seem im going to have my new d/s frame
      altered.
      Perhaps you could further help me, my swinging arm has 2 ally removable
      bushes with flanges should they be metalastik?
      Regards Rick

      Comment

      • #4
        Originally posted by rickport View Post
        Hi Mike thanks for speedy reply, (vilserv have not responded after 2 wks).
        Measurements you give are correct ( same as mine ) if taken at right angles to centres. Unfortunately dwg M11/S shows top of shocks to front fixing to be
        8 15/32" on diagonal and that's how new dual seat frame has been made.
        ( No not having fun ) It would seem im going to have my new d/s frame
        altered.
        Perhaps you could further help me, my swinging arm has 2 ally removable
        bushes with flanges should they be metalastik?
        Regards Rick
        The swinging arm should have metalastics fitted.

        Comment

        • #5
          25db

          Thanks Stuart, where can I get these bushes from and also the relevant spacers.
          Many thanks, Rick

          Comment

          • #6
            Originally posted by rickport View Post
            Thanks Stuart, where can I get these bushes from and also the relevant spacers.
            Many thanks, Rick
            Bushes available from

            Robush Ltd
            Gull Farm
            Gull Lane
            Grundisburgh
            Suffolk
            IP13 6RN

            Tel: 01473 738569
            Fax: 01473 738751
            Sales@robush.co.uk

            More details on this thread http://www.greeves-riders.org.uk/for...ghlight=Robush The spacers you will have to make or have made.

            Comment

            • #7
              Originally posted by John Wakefield View Post
              Bushes available from

              Robush Ltd
              Gull Farm
              Gull Lane
              Grundisburgh
              Suffolk
              IP13 6RN

              Tel: 01473 738569
              Fax: 01473 738751
              Sales@robush.co.uk

              More details on this thread http://www.greeves-riders.org.uk/for...ghlight=Robush The spacers you will have to make or have made.
              Where would we be without Johns help?

              Comment

              • #8
                25DB S/A bushes

                Many thanks Stuart and John, where would we be without you.
                Just don't emigrate.
                Thanks. Rick.

                Comment

                Previous template Next
                Working...
                X