Does anybody have the dimensions for the spacers between the engine plates and the swinging arm on a 1960 bike. cheers Bob
Announcement
Collapse
No announcement yet.
25dc engine plate spacers
Collapse
X
-
25dc engine plate spacers.
Hi. Bob. Drawings of this and engine spacers are available from GRA, Reading from left to right from the rear is as follows, Nut, spacer=7/16 I/D 7/8 O/D 3/16 long, FRAME LUG, S/arm, spacer=29/64 I/D 3/4 O/D 13/16 long,ENGINE PLATE, spacer=29/64 I/D 1 inch 1/4 long, BATTERY BOX, ENGINE PLATE, spacer=29/64 I/D 3/4 O/D,1/13/32 long SWINGING ARM, FRAME LUG, Nut. I hope this makes sense. Good luck. Les.
-
A search on spacers would have revealed this link http://www.greeves-riders.org.uk/for...=frame+spacers to the Greeves drawing
Comment
Comment