Wheel now back from rebuilding and was just trying to fathom out all the spacers and washers my greeves has accumulated for both front and rear wheels, looking at other posts it seems that there should only be a couple per wheel.
Could someone do me a diagram of the configuration of spacers from bearing to wheel nut and any sizes of spaces that I should have for both sides of each wheel, so I can make some.
Also the half locking nut on the chain side seems to have stripped, an idea where they can be sourced.
Thanks once again for your help, it will be the engine soon and I will probably need help with that to, as never worked on a british engine and not sure how far to strip it down.
Could someone do me a diagram of the configuration of spacers from bearing to wheel nut and any sizes of spaces that I should have for both sides of each wheel, so I can make some.
Also the half locking nut on the chain side seems to have stripped, an idea where they can be sourced.
Thanks once again for your help, it will be the engine soon and I will probably need help with that to, as never worked on a british engine and not sure how far to strip it down.
Attached Files