As in the title, I have electronic ignition on my bike but I do not have a kill switch fitted. Where do you connected this in the circuit. Does the switch short circuit the 2 wires coming from the device or maybe it short circuits 1 of the wires to the frame. Any ideas thanks in advance
Announcement
Collapse
No announcement yet.
connecting a kill switch
Collapse
X
-
Electronic ignition
If you have the Electrex World unit installed contact Villiers Services about this. They put one on my bike and the wiring is the opposite way round to the wiring diagram due to changes at the engine end! There are two connections to the CDU which are reversed. Spur from one goes to the kill switch which then has an earth wire to the frame.Ian Wilkinson '61 Scottish 24TD118
Comment
-
Originally posted by 350biker View PostIf you have the Electrex World unit installed contact Villiers Services about this. They put one on my bike and the wiring is the opposite way round to the wiring diagram due to changes at the engine end! There are two connections to the CDU which are reversed. Spur from one goes to the kill switch which then has an earth wire to the frame.One Life Live it
Comment
Comment