If this is your first visit, be sure to
check out the FAQ by clicking the
link above. You may have to register
before you can post: click the register link above to proceed. To start viewing messages,
select the forum that you want to visit from the selection below.
Thanks for your reply Brian, I got that it is a Mk1 MCS, round swinging-arm,W3 rim, it should be 1 inch and 13/16 off 'Sprocket' Rob on the forum
cheers Dave
Yes, I've seen the replies on the other thread. A guy on another forum couldn't get enough info for a bike he was restoring, so he had to take the rest of the rolling chassis to the wheel builder for him to check the proper alignment.
Comment