Wanted pair of exhaust nuts that screw in to barrel for a 250cc anzani thanks spike
Announcement
Collapse
No announcement yet.
Anzani exhaust nuts
Collapse
X
-
Would Villiers 4T ones be the same thread? They are 1.75 inch dia x 20 tpi
There is a British Anzani Forum http://www.britishanzani.co.uk/cgi-bin/yabb2/YaBB.pl but looking at it there dont seem to be any real posts for around 3 years
Update: According to Collin's book the exhaust pipes on an Anzani are 1 3/8" dia whereas the Villiers 4T has 1 1/2" pipes, so nuts would probably not be interchangeable. If you can establish the diameter of the thread & the number of threads per inch (tpi) it should be easy enough to get a couple made.
Comment
-
Dsu 674 25r
Whilst talking Anzani, does anyone know who the owner is of this 25R (DSU 675 frame number 6358/25R)
I took the pic at Wimbotsham Rally back in 1999 but did not record who had entered it. Looks to be a collector rather than a rider as its remained un-taxed since May 1992. The bike next to it looks like a 25D with Villiers 2T engine, I do not have registration number of that.Last edited by John Wakefield; 12/12/2016, 05:40 PM.
Comment
Comment