The Anglian Enduro is having a make over it has been stripped of wheels, mudguards, shocks - everything bolted to the frame. I took the forks off and re-greased the bearing and they have been hand painted. It should be hammered silver enamel but trying to get the correct affect just did not happen. The hammered Hammerite spray goes on well however does not leave a very distinctive hammered effect. The liquid Hammerite has a much better hammered effect so I have used that.
I have just finished filing down the Tig welds as there were a few too many holes in the rear mudguard as well as a split either side.
Next job is to change the chrome springs on the rear shocks to black
I have just finished filing down the Tig welds as there were a few too many holes in the rear mudguard as well as a split either side.
Next job is to change the chrome springs on the rear shocks to black
Comment