If this is your first visit, be sure to
check out the FAQ by clicking the
link above. You may have to register
before you can post: click the register link above to proceed. To start viewing messages,
select the forum that you want to visit from the selection below.
My fork bushes (35mm) appear to be quite worn. They look to be held in with a spring retaining clip. Are the bushes replaceable, and if so where might I find some?
Ok I have found some generic bushes, 41mm x 35mm x 35mm, which will need to be turned down to an OD of 40mm. I will report back in due course on how they work out.
Comment