Just had a great CRMC meeting at Pembrey and my RDS went well. However, the two bolts holding the Abcon exhaust stub to the barrel fell out - no lock-wire! What's the best way to attach - bolts or studs and what is the thread please? Do people use a gasket, Hylomar or what to help seal it? Brands hatch next so don't want a repeat. Advice welcome.
Announcement
Collapse
No announcement yet.
Exhaust attachment to barrel
Collapse
X
-
Originally posted by shelly View Post1/4 whit is the original size but quite a lot are drilled out oversized.
Gary has the 1/4 deep nuts drilled for wiring.
Villiers do the 13/4 copper gaskets
British.bikes@yahoo.com
01452 728566Last edited by John Wakefield; 18/04/2022, 11:42 PM.
Comment
-
You welcome 1340fxd, top man Gary and he is a GRA member. Lots of Greeves parts on the web site and more in the process of manufacture. https://www.britishbikes1970.com/ also does rebuilds etc. If you cant find what you want on the web site, give Gary a call, he may well have other parts not listed.
Comment
Comment