I have made an inquiry to EBC (the motorcycle brake shoe manufacturer) as to if they can supply a replacement shoe for the BHC full width hubs. The nearest they do is their part No EBC990G (the G means grooved lining) The size of these are 150mm x 30mm wide so would be 2mm down on the original 6" dia (152.4mm) The 30 mm width would be OK as its only 1.4mm over the 1 1/8 inch original. Whilst these would probabaly be OK on a new hub, the wear life would be reduced.
Whilst VS do a replacement ling service at £21.95 they do not appear to sell complete shoes anymore. so if you have damaged shoes or missing ones the EBC ones could be of use. They could of course be subsequently re lined with thicker shoes next time round. EBC990G apparently fit an Ossa 250 Cross/Fuego/Super Pioneer https://www.ebay.co.uk/itm/FIT-OSSA-...8zBm:rk:1
f:0
Has anyone used the EBC shoes?
Whilst VS do a replacement ling service at £21.95 they do not appear to sell complete shoes anymore. so if you have damaged shoes or missing ones the EBC ones could be of use. They could of course be subsequently re lined with thicker shoes next time round. EBC990G apparently fit an Ossa 250 Cross/Fuego/Super Pioneer https://www.ebay.co.uk/itm/FIT-OSSA-...8zBm:rk:1
f:0Has anyone used the EBC shoes?