If this is your first visit, be sure to
check out the FAQ by clicking the
link above. You may have to register
before you can post: click the register link above to proceed. To start viewing messages,
select the forum that you want to visit from the selection below.
Kenny, Villiers Services have got good stocks of 2T spares 20 thou oversize pistons should not be a problem. Here's their web address http://www.villiersservices.co.uk/index.htm drop them an email. I think the pistons will be around $50 each
Kenny, Villiers Services have got good stocks of 2T spares 20 thou oversize pistons should not be a problem. Here's their web address http://www.villiersservices.co.uk/index.htm drop them an email. I think the pistons will be around $50 each
Thanks very much for the info guys.
I'm in the dark on the twins. Frank Conley was able to help me with one new piston but with no rings. I still have to dig into the motor to check out the lower end. Never had a twin motor apart.
The model is a 25DC with non-paddle wheel hubs, a low number in production too. Ah! another project!
Comment