Tried a search but couldn't see an answer
Had set to 3/16 " based on info gleaned from the web. Its Running rich, adjustment of the pilot air screw don't produce the expected rise I revs to tune its position. But note if I turn off the fuel as the float bowl empties rev rise until it stalls.
So I have set it to about 3/8" running leaner now but too lean as the revs hang after closing the throttle. So I guess somewhere in between is right? Or is the pi!of jet wrong can't see any numbers on it to tell.
Had set to 3/16 " based on info gleaned from the web. Its Running rich, adjustment of the pilot air screw don't produce the expected rise I revs to tune its position. But note if I turn off the fuel as the float bowl empties rev rise until it stalls.
So I have set it to about 3/8" running leaner now but too lean as the revs hang after closing the throttle. So I guess somewhere in between is right? Or is the pi!of jet wrong can't see any numbers on it to tell.
Comment