Announcement

Collapse
No announcement yet.

Hi points nut

Collapse
X
 
  • Filter
  • Time
  • Show
Clear All
new posts

  • Hi points nut

    Hi can any one tell me the thread of the little brass screw on the points cheers

  • #2
    Assuming you are talking about Villiers engines Its a 4BA on the twins so presumably same on singles. The screw is actually steel with a large brass washer. It has a larger than normal cheese head. Beware that the thread may be larger on your engine if the trhead had been stripped and someone has tapped it out to a larger size.

    Comment


    • #3
      Cheers John,I must try harder yes I did mean villiers 32a and I also meant the brass nut on the points .but thanks for reading in between the lines.looking at getting taller nut made

      Comment


      • #4
        Nut is probably a BA thread

        Comment

        Working...
        X