If this is your first visit, be sure to
check out the FAQ by clicking the
link above. You may have to register
before you can post: click the register link above to proceed. To start viewing messages,
select the forum that you want to visit from the selection below.
Hi.Gary & Brian. I have a genuine 32Dc,which has a flash on both sides,one is high up on the tool box lid and one on the other side of tool box in the same position I hope this helps. No idea where these are available. Best wishes,Les.
GSM Graphic Arts: Trusted label manufacturers and suppliers in the UK. Get high-quality, custom labels for your products. Contact us today for a quote.
This firm should be able to make them with suitable artwork, but batch size would be a factor no doubt. Worth asking though.
I had it in my head they were metal but if they are printed onto silver foil I can get some made. I use to be in the sticker industry and still have some contacts.
Has anyone got a sample I can use to copy or a good close up photograph with height and width measurements?
I have spoken to someone tonight who is going to supply me with a photograph and template for the shape. As soon as I have a costing I will post again.
They were metal about 1/16 inch thick, if look at John's post today about SCAM you will see a badge on the toolbox side as well but that is a later bike.
The 32DC had thin cast alloy badges on both sides of the toolbox. They're completely unobtainable now - in fact I've only seen an original once - but they were reproduced in the past in alloy sheet with the "32DC" painted on.
Comment