If this is your first visit, be sure to
check out the FAQ by clicking the
link above. You may have to register
before you can post: click the register link above to proceed. To start viewing messages,
select the forum that you want to visit from the selection below.
Can anyone please help Robert out with this info then...? Someone out there must know the answer! Once again, forum member 'Bearingman' might well have the info you need.
In the meantime, if you can identify what size/type of thread the hole in your petrol tank has (do you have a thread gauge?-there are metric and imperial versions available at modest cost, and are very handy bits of kit to have in the toolbox!) you might be able to match something up from another bike that would be suitable.
Good luck with it, and fingers crossed that someone will get back to you on this topic.
Can anyone please help Robert out with this info then...? Someone out there must know the answer! Once again, forum member 'Bearingman' might well have the info you need.
In the meantime, if you can identify what size/type of thread the hole in your petrol tank has (do you have a thread gauge?-there are metric and imperial versions available at modest cost, and are very handy bits of kit to have in the toolbox!) you might be able to match something up from another bike that would be suitable.
Good luck with it, and fingers crossed that someone will get back to you on this topic.
Brian.
Brian.
Hello to all.
My Pathfinder uses the standard type Greeves petcock, so you should be able to locate one from one of our members.
Comment